| EXCLUSIVE FEATURES |
- Direct drive industrial pump with ten year warranty
- Advanced pump design gives multi-hour bypass and run-dry capability preventing accidental pump damage
- APG pumps freeze proof, AQ freeze resistant
- Pump self primes out of tank, pond or ocean
- World patented valves and stainless steel plungers
|
|
|
| CLEANING WITH HOT WATER THE DK WAY |
Here are some effective ways of combining hot water with a Dirt Killer rotary nozzle.
- Turn down the temperature to 150° and use a DK rotary nozzle. This method combines the cleaning impact of the DK nozzle and the oil melting ability of hot water.
- Use DK nozzle to pre-clean with cold water, then take off the DK nozzle and use very hot water for final rinse.
|
|
|
|
| STANDARD FEATURES |
- Adjustable pressure and adjustable temperature
- Energy efficient (TEFC) 1750 RPM electric motors
- Honda 2:1 gear reduced OHV gas engines with low oil alert
- Stainless steel frame and coil wrap with 10" pneumatic wheels
- Schedule 80 ASTM 1/2" heating coil
- Schedule 80 corrosion resistant plumbing
- Fuel filter with shut-off (cleanable)
- Removable poly fuel tank with quick disconnects
- Trigger gun control
- Wire braided hose. 50 ft.
- Insulated wand
- Exit side chemical injection
- Four flat tip nozzles
- Glycerin filled pressure gauge
|
|
|
| |
| USER FRIENDLY |
-
 Worry free operation is achieved through advanced design. Most pressure washer pumps with all ceramic plungers are quickly damaged when run without water or left to idle for too long. The pump can run without water or idle in bypass for hours without damage, preventing expensive accidents caused by foolish mistakes. Pumps run dry by using molybdenum backup rings combined with ceramic coated stainless steel plungers to provide superior heat transfer from the pump head to the oil bath. Designed for tough working conditions and with few moving parts, pumps require minimum maintenance and are easily serviced. No special tools needed.
- Dirt Killer Pressure Washers use advanced German pump technology. Direct drive pumps use a wobble plate to drive three ceramic-coated stainless steel plungers that produce the flow and pressure. Because Dirt Killer Pressure Washers use either 2:1 gear reduced Honda engines or electric motors the pump turns at 1750 -1800 rpm extending engine and pump bearing life. While producing substantially more torque and psi than a crank-case pump. This simple rugged design has fewer moving parts and requires no special tools - making pump maintenance inexpensive and easy.
|
|
| |
| HOT WATER APPLICATIONS: |
- Cleaning Greases, Oils, Petrochemicals on machinery, facilities, tanks, etc.
OPTIONS
- 220V 3 phase
- Steam Combo on DK pressure washers
|
|
| |
 |
 |
 |
 |
 |
 |
| Therm C11/130 TST |
Therm 2175 TST |
E 1450 |
E 3000 |
H 2000 |
H 3210, H 3212 |
| Therm C13/180 TST |
Therm 1165 TST |
E 1750 |
E 3000-3Phase |
H 3010 |
H 3612 |
|
| |
| PRESSURE WASHER PRICING |
| Pressure Washer Model |
PSI |
GPM |
BTU |
Burner Power |
Nozzles (Orifice) |
Pump Type |
Engine / Motor |
List Price |
Your Price |
| ELECTRIC |
Therm C11/130 TST
Part # 98THC11130 |
2,000 |
2.9 |
320,000 |
230v. |
25° Fan (4.5) |
AM
Kränzle
|
3 hp, 15 amps, 230v.
1 Phase |
$5800.00 |
$4,040.00 |
Therm C13/180 TST
Part # 98THC13180 |
2,600 |
3.4 |
320,000 |
230v. |
25° Fan (4.5) |
AM
Kränzle |
3 hp, 15 amps, 230v.
3 Phase |
$6,000.00 |
$4,190.00 |
Therm CA11/130 TS
Part # 98THCA |
2,000 |
2.9 |
320,000 |
230v. |
25° Fan (4.5) |
APG18
Kränzle
|
3 hp, 15 amps, 230v.
1 Phase |
$5,400.00 |
$3790.00 |
Therm 2175 TST
Part # 9800245 |
2,500 |
3.3 |
320,000 |
220v. |
TDK (4.5)
25° Fan (4.5) |
AQ
Kränzle |
5 hp, 25 amps, 230v.
1 Phase |
$7,000.00 |
$4,900.00 |
Therm 1165 TST
Part # 9800244 |
2,400 |
5.0 |
320,000 |
220v. |
TDK (7.0)
25° Fan (6.5) |
AQ
Kränzle |
7.5 hp, 21 amps,
220v. 3 Phase |
$7,100.00 |
$4,990.00 |
Therm 1165 TST440
Part # 9800444 |
2,400 |
5.0 |
320,000 |
440v. |
TDK (7.0)
25° Fan (6.5) |
AQ
Kränzle |
7.5 hp, 15 amps,
220v. 3 Phase |
$7,100.00 |
$4,99.00 |
E 1450
Part # 9800047-s |
1,450 |
2.4 |
- |
110v. |
Flat tips
(4.5) * |
APG18
Kränzle |
2 hp, 20 amps,
110 v. |
$5,700.00 |
$3940.00 |
E 1750
Part # 9800048-s |
1,750 |
3.2 |
- |
220v. |
Flat tips
(4.5) * |
APG18
Kränzle |
3 hp, 15 amps,
220 v. 1 Phase |
$5,900.00 |
$4,090.00 |
E 3000
Part # 9800051-s |
3,000 |
4.0 |
- |
220v. |
Flat tips
(5.0) * |
AQ
Kränzle |
7.5 hp, 34 amps,
220 v. 1 Phase |
$8,000.00 |
$5,490.00 |
E 3000-3Phase
Part # 9800224-s |
3,000 |
4.0 |
- |
220v. |
Flat tips
(5.0) * |
AQ
Kränzle |
7.5 hp, 20 amps,
220 v. 3 Phase |
$8,500.00 |
$5,790.00 |
| GAS |
H 2000
Part # 9800049-s |
2,000 |
3.5 |
- |
110v. |
Flat tips
(5.0) * |
APG18
Kränzle |
5.5 Honda, 2:1 gear reduction |
$6,700.00 |
$4,590.00 |
H 3010
Part # 9800216-s |
3,000 |
4.5 |
- |
110v. |
Flat tips
(3.0) * |
APG15
Kränzle |
5.5 Honda, 2:1 gear reduction |
$6,900.00 |
$4,790.00 |
H 3210
Part # 9800052-s |
3,200 |
4.2 |
- |
110v. |
Flat tips
(5.0) * |
AQ
Kränzle |
11 Honda, 2:1 gear reduction |
$7,700.00 |
$4,890.00 |
H 3212
Part # 9800053-s |
3,200 |
4.2 |
- |
12v. bat. |
Flat tips
(5.0) * |
AQ
Kränzle |
11 Honda, 2:1 gear reduction, Elec. Start |
$8,500.00 |
$5800.00 |
H 3612
Part # 9800054-s |
3,500 |
4.2 |
- |
12v. bat. |
Flat tips
(5.0) * |
AQ
Kränzle |
13 Honda, 2:1 gear reduction, Elec. Start |
$9,000.00 |
$5999.00 |
|
Kranzle Hot water high pressure washers clean powerfully
|
